SDSHobby
RED & BLUE & WHITE WM EDGE 540 EPP SERIES RC MODEL ELECTRIC AIRPLANE ARF
| Servo | 1.5-2kg/cm;0.1-0.18sec; 9-12g(4pcs) |
Specifications:, Wing Span:, 955mm, Length:, 945mm, Wing Area:, 15.2dm, Weight:, 480g (without battery), Features:, Requirements for Ready to Fly Set (need to buy separately):, Motor:, 834, ESC:, 18-30A, Battery:, 3S 11.1V 1000-1300MAH Li-po, Prop:, 10*4.7/11*4.7,
The product is mainly made of EPP material, light-weight and ...SDSHobby
SPITFIRE 900MM V2 EPO ALMOST READY TO FLY BRUSHLESS VERSION (W/O REMOTE CONTROL AND BATTERY AND CHARGER)
| Wingspan | 900mm |
| Overall Length | 762mm |
| Servo | 9gX4 |
| ESC | 18A |
| Motor | BM2810CD-KV1080 Brushless Outrunner |
| Prop | 8*6*3 |
| Material | EPO |
| Battery | 11.1v 1250mAh 15C Li-Po |
Specification:, Recommended equipments (need to buy separately):, Note:, CTN SIZE (cm) :, 103*32*77 (the carton size is for 4 pcs/ctn),
.4G RC 4channel ChargerSDSHobby
SKYBUS EPO FOAM PLANE (WHITE) ALMOST READY TO FLY BRUSHLESS VERSION (W/O REMOTE CONTROL AND BATTERY AND CHARGER)
| Material | EPO |
| Wing span | 1470mm |
| Total Length | 980mm |
| Wing area | 24.6 |
| Wing loading | 48.8g/ |
| Flying weight | 1200g |
| Servo | 4 pcs* 9g |
| ESC | 30A*2 |
| Brushless outrunner motor | KV1100*2 |
| N.W.(KGS) | 3.0 |
| G.W.(KGS) | 3.6 |
| Battery | 11.1V 2200mah 15C Lipo battery |
| CTN SIZE (cm) | 98.5*50*61.5 (the carton size is for 3 pcs/ctn) |
Specifications:, Recommended equipments (need to buy separately):, More information:, This is DC-3 Skybus large scale EPO old style electric twin engine airplane from Dynam with 1470mm Wing span. The airplane has very nice Scale-Look and details. It has two preinstalled powerful brushless motor and 2-Blad Prop. All servos, Receiver and ESC are preinstalled from the Factory. The surface of the EPO material is extremely flat and rare. The complete model is made BY EPO which is very hard and the most crash-resistance material. The airplane is equipped with two powerful brushless motor and two 40 Amp ECS which give the model extra power and flight time. Its wide wingspan makes the model stable in the air with long glide-ratio. This model is suitable for intermediate to advanced pilots. The building time is around 45 min., Note:,
d m2 d m2 .4g RC 4channel ChargerSDSHobby
WM MX2 HEPP RC MODEL AEROBATICS ELECTRIC AIRPLANE ARF TYPE B
| Wingspan | 955mm |
| Length | 945mm |
| Wing Area | 15.2dm |
| Weight | 550g (without battery) |
| Motor | 2834;2215; 2217;950-1100KV Brushless outrunner |
| ESC | 25-30A |
| Battery | 3S 11.1V 1100-1300MAH Li-Po |
| Prop | 10*4.7/11*4.7 |
| Servo | 1.5-2kg/cm, 0.1-0.18sec, 9-12g(4pcs) |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
The revolutionary design adds to the structural intensity and the ...SDSHobby
CONVERSION COMBO KIT FOR 30-35CC GASOLINE AIRPLANE CONVERTED TO ELECTRIC AIRPLANE (3.5IN SPINNER)
| Motor | 6350 370KV Brushless motor 14 pole |
| Size | 63mm*50mm |
| MAX power | 2000W, 93A |
| Diameter of axle | 8mm |
| ESC | 100A (without UBEC output) 3-7S Lipo |
| Spinner | 3.5inch , 1pcs |
| Electric Prop | 20*8 inch |
| Servo | 60g* 3pcs, 9kg |
| Servo Arm | metal arm*5pcs |
| One Set Banana Bullet Connector | ¢3.5mm*3 pairs, ¢6mm*2pairs |
Application Fields:, Special made for 30-35CC gasoline airplane converted to electric airplane.,
Specifications : 6-7S Lipo 5g *2pcs, 4kg (for elevator) One ...SDSHobby
CONVERSION COMBO KIT FOR 30-35CC GASOLINE AIRPLANE CONVERTED TO ELECTRIC AIRPLANE (3.0IN SPINNER)
| Motor | 6350 370KV Brushless motor 14 pole |
| Size | 63mm*50mm |
| MAX power | 2000W, 93A |
| Diameter of axle | 8mm |
| ESC | 100A (without UBEC output) 3-7S Lipo |
| Spinner | 3inch, 1pcs |
| Electric Prop | 20*8 inch |
| Servo | 60g* 3pcs, 9kg |
| Servo Arm | metal arm*5pcs |
| One Set Banana Bullet Connector | ¢3.5mm*3 pairs, ¢6mm*2 pairs |
Basic Equipments for the Conversion Combo Kit:, Application Fields:, Special made for 30-35CC gasoline airplane converted to electric airplane.,
6-7S Lipo 5g*2pcs, 4kg (for elevator) One Set Mounting Post ...SDSHobby
CESSNA 310 EPO FOAM PLANE ALMOST READY TO FLY BRUSHLESS VERSION (W/O REMOTE CONTROL AND BATTERY AND CHARGER)
| Material | EPO |
| Wing span | 1280mm |
| fuselage Length | 1100mm |
| Wing loading | 58g/ |
| Flying weight | 1200g |
| Servo | 9g*4 pcs |
| ESC | 30A, 2PCS |
| Brushless outrunner motor | KV3300, 2PCS |
| N.W.(KGS) | 3.87 |
| G.W.(KGS) | 5.0 |
| Battery | 11.1V 2200mah 20C Lipo battery |
| CTN SIZE (cm) | 118*46*89 (the carton size is for 4 pcs/ctn) |
Specifications:, Recommended equipments (need to buy separately):, More information:, This is the first Big Size Cessna 310 Grand Cruiser Twin Motor airplanes made by the hard material EPO in the market. The airplane has very nice Scale-Look and details. It has two preinstalled powerful brushless motor and 3-Blad Prop. All servos, Receiver and ESC are preinstalled from the Factory. The model is designed for Optional Electric Retract. Flaps are also designed in the wing and if you like to use plap for landing/Take off you need just to install two Micro servos in the wing (the place for flap servo is also designed in the wings). The surface of the EPO material in this model is extremely flat and strang. The complete model is made BY EPO which is very hard and it is the most crash-resistance material. The Building time is around 90 mins..., Note:,
d m2 With retract landing gear .4g RC 4channel ChargerSDSHobby
EME 120CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 120cc |
| Weight | 2400g /engine, 160g/muffler, 150g/ignition |
| Carburetor | EME |
| Compression Ratio | 7.6 |
| Power | 12.2HP@7000RPM |
| Practical RPM | 1100~7200RPM |
| Thrust 1 | 27.2kgf (50~200M altitude) |
| Thrust 2 | 24.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades 28*10, 28*12, 29*10 prop, or 27*12 3 blades prop |
Specifications:, Package Contents:, EME120 engine*1pcs,
Muffler*2pcs Ignition module*1pcs Spark plug*2pcs Stand-off spacer*4pcs Muffler screw*4pcs Muffler ...SDSHobby
EME60 60CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 60cc |
| Weight | 1390g/engine, 180g/muffler, 140g/ignition module |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 6.2HP@7200RPM |
| Idle RPM | 1350RPM |
| Practical RPM | 1350~7500RPM |
| Thrust 1 | 16.2kgf (50~200M altitude) |
| Thrust 2 | 14.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 23*10, 24*8, 24*10(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME60 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EME35 35CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 35cc |
| Weight | 960g/engine, 45g/muffler, 140g/ignition |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 3.6HP@7100RPM |
| Idle RPM | 1550RPM |
| Practical RPM | 1550~7500RPM |
| Thrust 1 | 9.0kgf (50~200M altitude) |
| Thrust 2 | 8.1kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 18*10, 19*10, 20*8(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME 35 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 5*5E FOR MOTOR
| Diameter for Prop | 5 inch |
| Pitch | 5 inch |
| Height of Propeller Bottom | 7mm |
| Net Weight | 3.7g / 0.13oz |
| Suitable for the Following Motor Shaft Diameters | ¢2mm, ¢3mm, ¢3.175 mm, ¢4mm, ¢5mm, ¢6mm (the above 6 prop washers included) |
| Recommended Motor | KV2200-2800 (3S Lipo) |
| Bore Inner Diameter | ¢6.3mm |
| Outer Diameter of Washer | ¢7.62mm |
Specifications:, Feature:, Electric prop with high performance and speed, extra-included washer is applicable to adjust the aperture to be well fit for shaft with different diameter., Includes:, 1 x EMP 5*5E electric prop,
One set of washerSDSHobby
CNC CRRC GF55II 55CC TWIN CYLINDER GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 55CC (27.2CC*2), Bore x Stroke:, 34mm*30mm, Weight:, 1780g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, 5.6HP/7600RPM, RPM Range:, 1600-7800rpm, Ignition:, DC-CDI (4.8V), Gasoline-Version:, Pre-mixed Fuel, 25-40 (Gasoline):1, Lubrication Oil:, two-stroke engine oil, Propeller:, 0*12-23*8 Two blades prop (suggest using 22x8 prop), Cooling System:, Air Cooled, Included the Following Parts:,
(including CDI and Muffler) Engine*1pcs Washers*2pcs Installation Screw*8pcs Muffler*2pcs CDI ...SDSHobby
CRRCPRO GF26I 26CC GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 6cc, Bore x Stroke:, 34mm*28.6mm, Weight:, 1194g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, .4ps / 9000rmp, Speed range:, 1600-9500rpm, Ignition:, DC-CDI, Gasoline-Version:, Pre-mixed Fuel, 25-40 (Gasoline): 1, Lubrication Oil:, cycle engine oil, Propeller:, 16x8, 16x10, 17x8, 17x10 (Two blades prop), Cooling System:, Air Cooled, Included the Following Parts:,
(Including CDI and Muffler) Engine Walbro Carburetor Plug Spanner*2pcs CDI ...SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 18*8E FOR MOTOR
| Diameter for Prop | 18 inch |
| Pitch | 8 inch |
| Recommended Motor | N6354-KV250/KV200(4-10S Lipo) |
| Bore Inner Diameter | ¢10mm |
| Outer Diameter of Washer | ¢12.7mm |
| Height of Prop Bottom | 16.5mm |
| Net Weight | 90.4g / 3.19oz |
| Suitable for the Following Motor Shaft Diameters | ¢4mm, ¢5mm, ¢6mm, ¢6.35mm, ¢8mm, ¢9.52mm, ¢10mm (the above 7 prop washers included) |
Specifications:, Feature:, Electric prop with high performance and speed, extra-included washer is applicable to adjust the aperture to be well fit for shaft with different diameter., Includes:, 1 x EMP 18*8E electric prop,
One set of washerSDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 17*10E FOR MOTOR
| Diameter for Prop | 17 inch |
| Pitch | 10 inch |
| Recommended Motor | N5055-KV400, N5065-KV380 (3-8S Lipo) |
| Bore Inner Diameter | ¢10mm |
| Outer Diameter of Washer | ¢12.7mm |
| Height of Prop Bottom | 13.9mm |
| Net Weight | 64g / 2.27oz |
| Suitable for the Following Motor Shaft Diameters | ¢4mm, ¢5mm, ¢6mm, ¢6.35mm, ¢8mm, ¢9.52mm, ¢10mm (the above 7 prop washers included) |
Specifications:, Feature:, Electric prop with high performance and speed, extra-included washer is applicable to adjust the aperture to be well fit for shaft with different diameter., Includes:, 1 x EMP 17*10E electric prop,
One set of washer